Hadron H2 Fitting Guide
The Hadron H2 is a modern, premium single-handed sailing dinghy designed by Keith Callaghan as an evolution of the original Hadron H1. Built using lightweight carbon, epoxy and foam composite construction, it combines classic styling with responsive performance, excellent handling and comfortable ergonomics.
The H2 was designed to be versatile on both inland and coastal waters, offering exciting but manageable performance rather than extreme racing characteristics. Particular emphasis has been placed on safety and ease of use, with a hull design that aids capsize recovery, an open transom for easier re-boarding, and a spacious, comfortable cockpit.
Hand-built in small numbers with high-quality components, carbon spars and a fully adjustable control layout, the Hadron H2 is aimed at sailors seeking a modern, well-mannered single-hander that delivers both performance and pride of ownership.
Mainsheet System
The H2 is available with either a traditional centre mainsheet arrangement, featuring a swivel jammer mounted in the centre of the cockpit, or a more contemporary off-boom "skiff-style" sheeting system.
Centre mainsheet (with track)
| Quantity | SKU | Descrption | System Notes |
| 1 | A5166ASS | Mainsheet Jammer | |
| 3 | A2040Tii | 40mm Single Dynamic Block - Tii-On | 2 tied to boom. 1 tied to traveller car. |
| 1 | A9014 | Size 14 Track | Bent to fit thwart. |
| 2 | A9214-PS | Size 14 Plastic End Stop | |
| 1 | A9114-Tii | Size 14 Tii-On Car | |
| 2 | A2020Tii-SHACKLE | 20mm Single Dynamic Block - Tii-On | Tied to either side of the A9114-Tii to run control line purchase through. |
Centre mainsheet (bridle, no track)
| Quantity | SKU | Descrption | System Notes |
| 1 | A5166ASS | Mainsheet Jammer | |
| 3 | A2040Tii | 40mm Single Dynamic Block - Tii-On | 2 tied to boom. 1 tied to bridle. |
Off Boom (rear bridle)
| Quantity | SKU | Descrption | System Notes |
| 1 | A2160 | Pro-Ratchet 60 | |
| 3 | A2040Tii | 40mm Single Dynamic Block - Tii-On | 2 tied to boom. 1 tied to bridle. |
Kicker System
The H2 has a couple of different options for the kicker, including a new "proder" style to help reduce mast bend when the kicker is on hard. Here we will list the standard continuous system that comes with most boats.
| Quantity | SKU | Descrption | System Notes |
| 1 | A2020HL | 20mm Single High Load Block | Top block |
| 1 | A-622105 | 5mm Bow Shackle With Forged Pin | |
| 4 | A2020 | 20mm Single Dynamic Block | Used for the rest of the cascade and leading lines to from mast base to cleats. |
| 1 | A2022 | 20mm Double Dynamic Block | Last cascade |
| 2 | A..77-497 | Ball Bearing Cam Cleat With Mega Pro Lead - Small | |
| 2 | A4665-LOW | Stainless Steel Wire Under Fairlead - Small, Low | Pair with A..77 |
| 1 | A4471 | U Bolt With Top & Bottom Backing Plate | |
| 1 | A4152 | Bullseye Fairlead With Liner - Large |
Cunningham System
| Quantity | SKU | Descrption | System Notes |
| 3 | A2020 | 20mm Single Dynamic Block | |
| 1 | A2022 | 20mm Double Dynamic Block | |
| 2 | A..77-497 | Ball Bearing Cam Cleat With Mega Pro Lead - Small | |
| 2 | A4665-LOW | Stainless Steel Wire Under Fairlead - Small, Low | Pair with A..77 |
| 2 | A4288 | Pressed Stainless Steel Lacing Eye - Small |
Outhaul System
| Quantity | SKU | Descrption | System Notes |
| 3 | A2020 | 20mm Single Dynamic Block | |
| 2 | A..77-497 | Ball Bearing Cam Cleat With Mega Pro Lead - Small | |
| 2 | A4665-LOW | Stainless Steel Wire Under Fairlead - Small, Low | Pair with a..77 |
| 2 | A4288 | Pressed Stainless Steel Lacing Eye - Small | |
| 1 | A8411-3 | Ball Stopper For 3mm Line |
Forestay System
| Quantity | SKU | Descrption | System Notes |
| 4 | A2020 | 20mm Single Dynamic Block | |
| 1 | A2022 | 20mm Double Dynamic Block | |
| 2 | A..77-497 | Ball Bearing Cam Cleat With Mega Pro Lead - Small | |
| 2 | A4665-LOW | Stainless Steel Wire Under Fairlead - Small, Low | Pair with a..77 |
| 1 | A-621104 | 4mm D Shackle With Forged Pin |
Additional Fittings
| Quantity | SKU | Descrption | System |
| 2 | A..39 | Through Deck Bush With Flange - 9mm x 9mm | Retrieval lines |
| 2 | A.256 | Nylon Sail Ring | Retrieval lines |
| 4 | A4099 | Toe Strap Plate Stainless Steel | Toe Straps |
| 2 | CL230 | Racing Junior Mk1 With Roller | Toe Straps |
| 4 | A4452 | Bullseye Fairlead With Liner - Medium | Toe Straps |
| 8 | A4439 | Through Deck Bush With Stainless Steel Inner - 6mm x 8mm | Toe Straps |
| 1 | A2131 | 30mm Single Dynamic Through Deck Block | Rig |
| 2 | A4272 | Vernier Adjuster | Rig |
| 2 | A4471 | U Bolt With Top & Bottom Backing Plate | Rig |
| 1 | A1923 | Stainless Steel Retaining Clip With Endcap | Rudder |
| 2 | A4078 | Single With Acetal Sheave | Rudder |
| 1 | AB1224 | H2 Pintle/ Gudgeon Transom Fitting | Rudder |
| 1 | AB1175 | H2 Rudder Stock | Rudder |
| 2 | A2020 | 20mm Single Dynamic Block | Centre Board |
| 1 | A8539-29 | Aluminium Threaded Through Deck Bush - 12mm x 29mm | Centre Board |
| 1 | A1737 | Internal Seal Hatch Cover - Small | MISC |
| 2 | A1837 | Internal Seal Hatch Cover - Medium | MISC |
| 1 | A.323 | Drain Socket With Captive Screw Bung | MISC |
| 1 | A..71 | Aerovane - Mast Head Mounted | MISC |
| 1 | A..71M | Aerovane - Lower Mast Mounted | MISC |
| 1 | A8411-3 | Ball Stopper For 3mm Line | MISC |
| 3 | A8411-4 | Ball Stopper For 4mm Line | MISC |
Swipe or scroll sideways to view the photos.