National 12 Fitting List

The National 12 is a twelve-foot-long dinghy sailed by two people. The class dates back to 1936 when the RYA wanted an alternative to the expensive international 14 class.

This class is a “development” class, so each boat can be built within a set of rules. This means there is quite a range of different shapes and set up’s found across the fleet.

This fitting list is based on a Dead Cat Bounce design and is just a guide to help choose the correct fittings.

  • National 12 dinghy launching

Downhaul

SKUDESCRIPTIONQUANTITY
A203030MM DYNAMIC BLOCK2
A213130MM ALLENITE THROUGH DECK2
A.677ALLENITE CAM CLEAT SMALL2
A.488SMALL ALLENITE FAIRLEAD2
A.439A13MM X 8MM X 8MM ALUMINIUM DECK BUSH 2

Jib Halyard

SKUDESCRIPTIONQUANTITY
A4379HK-90HIGH TENSION BLOCK WITH HOOK1
A4379HIGH TENSION BLOCK FIXED HEAD1
A-621104ROUND BODY D SHACKLE 4MM DIA.1
A203030MM DYNAMIC BLOCK2
A4568HIGH TENSION BLOCK1
A4779DOUBLE HIGH TENSION BLOCK FIXED HEAD WITH BECKET1
A213130MM ALLENITE THROUGH DECK2
A.677ALLENITE CAM CLEAT SMALL2
A.488SMALL ALLENITE FAIRLEAD2

Jib Pole Control Line

SKUDESCRIPTIONQUANTITY
A203030MM DYNAMIC BLOCK1
A4766STRAIGHTSMALL SWIVEL ALLENITE CAM CLEAT WITH STRAIGHT ARM1

Jib Sheets

SKUDESCRIPTIONQUANTITY
A.439A13MM X 8MM X 8MM ALUMINIUM DECK BUSH 2
A215050MM SWITCHABLE RATCHET BLOCK2
A4590SLIDING JIB FAIRLEAD & TRACK WITH PISTON STOP BLACK1 (PAIR)

Mainsheet

SKUDESCRIPTIONQUANTITY
A2040Tii40MM TIE ON DYNAMIC BLOCK3
A605134MM FIXING HOLE WIDTH PRESSED LACING EYE1

Mast Ram

SKUDESCRIPTIONQUANTITY
A203030MM DYNAMIC BLOCK2
A4766STRAIGHTSMALL SWIVEL ALLENITE CAM CLEAT WITH STRAIGHT ARM1
A213130MM ALLENITE THROUGH DECK1

Miscellaneous

SKUDESCRIPTIONQUANTITY
A1837138MM BLACK HATCH COVER WITH INTEGRAL SEAL1
A1737108MM BLACK HATCH COVER WITH INTEGRAL SEAL2
A55101000MM CARBON TILLER EXTENSION1
A..71AEROVANE MAST HEAD MOUNTED1

Rudder Control

SKUDESCRIPTIONQUANTITY
A203030MM DYNAMIC BLOCK5
A.439A13MM X 8MM X 8MM ALUMINIUM DECK BUSH 2
A213130MM ALLENITE THROUGH DECK1
A4766STRAIGHTSMALL SWIVEL ALLENITE CAM CLEAT WITH STRAIGHT ARM1

Shrouds

SKUDESCRIPTIONQUANTITY
A4471U BOLT WITH TOP & BOTTOM PLATE – 6MM ROD 32MM INT WIDTH1 (PAIR)
A4993HIGH TENSION BLOCK WITH CLEVIS PIN2
A203330MM DYNAMIC DOUBLE BLOCK WITH BECKET3
A203030MM DYNAMIC BLOCK10
A213130MM ALLENITE THROUGH DECK2
A..77BALL BEARING CAM CLEAT SMALL2
A.488SMALL ALLENITE FAIRLEAD2
A.439A13MM X 8MM X 8MM ALUMINIUM DECK BUSH 2
A4379HIGH TENSION BLOCK FIXED HEAD2
A4393HIGH TENSION BLOCK FIXED HEAD WITH BECKET2
A466916MM DOUBLE HIGH TENSION BLOCK WITH BECKET2
A4779DOUBLE HIGH TENSION BLOCK FIXED HEAD WITH BECKET2
A2020LZ20MM DYNAMIC BLOCK STAND UP2
A..77BALL BEARING CAM CLEAT SMALL2
A.488SMALL ALLENITE FAIRLEAD2
A.439A13MM X 8MM X 8MM ALUMINIUM DECK BUSH 4

Vang

SKUDESCRIPTIONQUANTITY
A2030HLF30MM HIGH LOAD DYNAMIC BLOCK WITH FORK1
A203030MM DYNAMIC BLOCK3
A203230MM DYNAMIC DOUBLE BLOCK1
A213130MM ALLENITE THROUGH DECK2
A..77BALL BEARING CAM CLEAT SMALL2
A.488SMALL ALLENITE FAIRLEAD2
A.439A13MM X 8MM X 8MM ALUMINIUM DECK BUSH 2