Team Fletcher-Sign May 2011 update Team Fletcher-Sign May 2011 update

Well since Hyeres we have been pretty busy down in Weymouth. Normally this time of year we spend picking the kit that we are going to use for the big regatta of the year like the Worlds, Sail for Gold etc. but with our winter testing plus a bit of testing over Palma and Hyeres we already know what we are going to use for the Sail for Gold which was nice and left a few less things to be done.

Instead we have spent the last few weeks working on the areas we felt needed to be improved after Palma and Hyeres. This was some starting practice and refining a few parts of our tuning guide.

On the whole it has gone very well, especially all coming together nicely on the last day when we did some racing the other Brits and some foreign teams. Well apart from a bit of capsize recovery after I was a little bit too chilled out during a gybe and did not really cross the boat or stop heading up on the exit Besides that it was all good.

Now all we have to do before the Sail for Gold, is a bit of boat work, put some GBR stickers on the main and have some time off. We go down to Weymouth on the 31st May to start our pre Sail for Gold prep, mainly just going to do some more racing and double checking the tuning guide etc. But for now we have a bit of time to relax and get ready!

Spacer Spacer

  Allen Brothers
Hallmark Industrial Estate
Phone      +44 (0)1621 774689
Fax      +44 (0)1621 773872
Map      Show map
“Allen products are warranted to be of merchantable quality and fit for the purpose for which they are sold. In addition, Allen products are guaranteed for life against defects in workmanship, subject to reasonable use. We will replace products which are found to have failed through manufacturing and raw material defects. The parts must have been fitted in accordance with our technical instructions, where present, and in any event following the technical guidance of our stockist or representative. No cash alternative or damages arising out of any failure will be met. While we take every reasonable effort to ensure the accuracy of published specifications, no liability will be accepted for errors or omissions. In the unlikely event of a claim arising, please return the part in question to Allen Brothers, together with a description of the circumstances. Your statutory rights are not affected.”
Web site created by Brakey Solutions